●I
n the total millage screen, press the
button once
to switch to Trip A screen.
●W
hen the engine switch is OFF, hold the
button for 3 seconds
to enter into the
settings screen.
Main menu functions
3-5
●
Trip A screen, Press the
button once
to
switch to Trip B screen.
●Hold the
button for 3 seconds
to clear
the Trip A recordings.
●
Trip B screen, Press the
button once
to
switch to the millage maintenance screen.
●
Hold the
button for 3 seconds
to clear
the Trip B recordings.
NOTE
Display can be switch off
(please refer to setting 4-8-1)
●I
n the millage maintenance screen, Press
the
button once
to switch to the
remaining millage screen.
●
Millage maintenance will count down
from setting value, when it reaches 0, the
screen will blink to indicate millage reached.
●When reminding feature is activated,
it
will automatic return to millage
maintenance screen if the millage
maintenance value is reached.
●When reminding feature is activated,
it
will automatically switch to millage
maintenance screen during startup if
remaining millage value is reached.
●
Hold the
button for 3 seconds
to
switch to inform function switch.
It will not display if it's not
supported in engine computer.
NOTE
●
Hold the
button for 10 seconds
to clear
the millage maintenance recordings.
○In the 0 second, start
holding the button.
○In the 3rd second, the
inform feature will blink
once.
○In the 5th second, inform
feature will switch back,
millage display will begin
blinking.
○During the 6~9th seconds
, if release button, will
cancel the process
○On the 10th second,
the millage maintenance
record is cleared.
Display can be switch off
(refer to setting 4-9)
NOTE
●In the remaining millage screen,
Press the
button once
to
switch to the average fuel
consumption screen.
●Remaining millage is lower than 16 km
(10mile), will display " LO RNG " to
inform users.
●
Hold the
button for 3 seconds
to
switch to inform feature switch
●The following situation will result
displaying "r----" or no display at all.
○Abnormal fuel sensor (short / open
circuit)
○Engine computer does not support th
is
feature
●Fuel related settings will a
ffect this
value's precision
●When reminding feature is activated,
it
will automatic return to the remaining
millage screen, if remaining millage is
too low.
●When reminding feature is activated,
it
will automatic switch to the remaining
millage screen during startup, if
remaining millage is too low.
NOTE
It will not display if it's not
supported in engine computer.
NOTE
Display can be switched off
(refer to setting 4-7-3)
●In the average fuel consumption screen,
press the
button once
to
switch to the
clock screen.
Display can be switched off
(refer to settings 4-7-4)
NOTE
Display can be switch off
(refer to settings 4-1)
NOTE
Display can be switch off
(refer to settings 4-8-2)
NOTE
It will not display if it's
incompatible in engine computer.
NOTE
●In the clock screen,
once
to
switch to the engine temperature
screen.
press the
button once
●In the engine temperature screen,
the
button once
to
switch to the voltage
screen.
press
4-1
Clock settings
●In the voltage screen,
press the
button
once
to
return to total millage screen.
Display can be switch off
(please refer to setting 4-8-3)
NOTE
Setting range : 12/24 hours
format.
NOTE
Settings and features index screen
4
●When the engine switch is OF
F,
h
old the
button for 3 seconds
to enter settings.
├ a 1.
T
ime(time format, time adjustment) - refer to procedure
├ a 2.Unit(speed unit, temperature unit)- refer to procedure
├ a 3.Back light(back light colo
r, brightness)- refer to procedure
├ a 4.
Tire(tire ratio percentage)- refer to procedure
├ a 5.Gear(gear indicating mode)- refer to procedure
├ a 6.W
arning light(overspeed warning)-refer to procedure
├ a 7.Fuel - refer to procedure
│ ├ .1.Fuel sensor type
│ ├ .2.Fuel test display
│ ├ .3.Fuel tank volume
│ └ .4.Fuel consumption display
├ a 8.Feature display- refer to procedure
│ ├ .1.Millage B display switch
│ ├ .2.Engine temperature display switch
│ └ .3.
Voltage display switch
├ a 9.Millage maintenance - refer to procedure
├ a10.
Total millage-refer to procedure
│ ├ .1.Unable to adjust internal millage
│ └ .2.Able to adjust external millage
Exit settings
●
Features index screen
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-7-1
4-7-2
4-7-3
4-7-4
4-8
4-8-1
4-8-2
4-8-3
4-9
4-10
4-10-1
4-10-2
●E
xample
：
Set time settings from
12 hours format to 24 hours format.
●Hold the
button for 3 seconds
to
enter time into the (hour) settings
screen.
Now the setting value will blink.
●EX
:
If want to set time to 24 hours
format.
●Press the
button once
to
select desired
setting value.
●In the clock settings screen, h
old the
button for 3 seconds
to enter into
the setting screen.
●
Example
：
Set clock settings from
1:00 to 1:05.
●Hold the
button for 3 seconds
to
return to the clock settings main screen.
●Clock settings main screen.
●
Press the
button once
to enter next
setting.
wh051ba11a P6-2
