●Haven't used the Lap timer for over 14 days.
●You are using the lap timer with 100km+
away from your last turn off position then it
will take longer to start up for positioning.
Entering settings and fuctions index menu
4
There are two scenarios for Startup Positioning Time.
●
Used the Lap Timer very frequently.
●
Around 1- 45 seconds.
●
Around 2 - 5 minutes.
Status
Time
Startup positioning
●In the main screen settings hold the button to enter into the settings menu.
●Function index
a 1. Unit
a 2. Racing
a 3. Display (Contrast / Brightness)
a 4. Memory
a 5. Info
Exit settings
5
Set up
Trouble shooting
6
The following situation does not indicate malfunction of the meter. Please check the following before taking it in for repairs.
※ If the problems persist after reviewing the above information, please contact your local distributors or us.
●Improper connection of GPS antenna.
→Make sure the GPS antenna is connected
correctly and no wires are broken.
●GPS antenna error
→Make sure the GPS antenna test light is
flashing normally.
→Normal flashing frequency is 60 times per
minute.
●
Incorrect time zone settings
→
Check unit operation settings in section 4.1
Check item
Trouble
The meter doesn't work
when the power is on.
Speed does not
appear or appears
incorrectly.
Trouble
Check item
The meter shows the
wrong readings
Temp does not appear
or appears incorrectly
●
The power doesn't supply to the meter.
→Please make sure the wiring is connected.
The wiring and fuse are not broken.
→The battery is broken or the battery is too
old to supply enough power (DC 12 V) to
make the meter for it to work.
●
Check the voltage of your battery,and
make sure the voltage is over DC 12 V.
The following situations are classified as normal:
●When the receiving environment is bad or the GPS
positioning is just finished, the meter may display
speed when the vehicle is stationary.
●The actual mileage and the displayed mileage in the
meter (ODO / Trip) might have 1 % - 5 %
accumulated difference depending on the average
satellite signal strength and user habits.
For more detailed instructions, please scan the QR code
and be redirected to our Instruction tutorial or
