p.6
3. After setting the 27
Φ
charcoal, please place the 16
Φ
charcoal (With ring) between 27
Φ
and
27
Φ
. Basic set-up is now complete.
You will be able to do standard grilling when you ignite it in this state.
Please place the branch-type casually as though putting down natural charcoal. The dramatic
impact will be increased.
KA Series Kosei Charcoal
Example of setting 16
Φ
charcoal
Please set between 27
Φ
and 27
Φ
.
How to Ignite
1. Before setting the gas stopcock to ‘Open’, please make sure that the appliance cock is on ‘Shut’.
2. While pushing the ignition knob, please turn it in the ignition direction (counter-clockwise).
The pilot flame will ignite with a clicking sound. When you let go of it at this point, the main
burner will ignite. (If it does not ignite the first time, please repeat the same action again slowly.)
It will take some time when the appliance is first installed, as there will be air inside the appliance.
When setting to medium flame, please use at the middle position. In this instance as well, please
set to full-open first and then turn it back to medium flame.
3. To put out the flame, please turn the knob back. (In a clockwise direction)
4. When you are finished using it, please be sure to shut off the gas stopcock.