5
SETTING THE TEMPERATURE
● Insert the plug in the wall socket and let the iron be kept upright.
● Turn the temperature control knob to the correct temperature
● The correct temperature will be reached when the pilot light has turned off. The pilot light will be
on and off from time to time indicating that the selected temperature is being maintained.
SPRAYING
This function can be used any time and it does not effect the ironing temperature.
● Fill water into the iron as described in “HOW TO FILL IN WATER”.
● Aim the nozzle to the garment.
● Press the spray knob
STEAM IRONING
This function can be used only at higher ironing temperature
●●
for moderate steam
●●● or MAX for maximum steam
● Fill water into the iron as described in “HOW TO FILL IN WATER”.
● Stand the iron on its rear side
● Connect the iron to a suitable mains supply outlet.
● Turn the temperature control to the “●●”,“●●●” or “MAX” setting.
● The pilot light turns off when the temperature is reached. The iron is ready for use.
● Turn the steam knob to the required position, steam starts coming out from the holes in the
soleplate.
Notice : With conventional steam ironing, water may leak from the soleplate if a too low temperature
has been select, if this happens, turn the temperature control to the advice position. Steam will
recommence as soon as appropriate temperature has been reached.
BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles.
● Fill the iron with water as described in “HOW TO FILL IN WATER”.
● Turn the temperature control to the position “MAX”
● The pilot light turns off when the required temperature is reached.
● The iron is ready for use.
● Press the steam control knob
● Steam will penetrate into the garment removing the wrinkles.
● Wait a few seconds before pressing the steam control knob again when there are stubborn
wrinkles.
Usually all wrinkles can be removed within three pressings.
DRY IRONING
● Connect the iron to a suitable mains supply outlet.
● Ensure that the steam control knob is in down position
● Select the setting on the temperature control)
● When the pilot light turns off, the requirement temperature is reached. The iron is ready for use.
Summary of Contents for KSW 11X
Page 1: ...USER S MANUAL...
