Koryo KIC 21C, User'S Manual & Warranty Card

Page: 5 / 12

Caution
• Please insert the plug into socket.
• Do not flush the cook top with water directly, use damp soft cloth to clean.
• Do not heat empty pot, in case the pot temperature becomes too high it can be dangerous.
• The cook top edge should has at least 10cm distance from other object.
• Do not use the cook top in high temperature environment and be far away from the fire.
• Do not use the cook top on metal or stainless table which has magnetic conduction.
Cleanliness & Maintenance
1. Please shut off the power and pull out the plug before your cleaning.
2. After remove dirt, please use neat wet cloth to clean the unit.
3. Do not clean by water directly, if water gets inside it may cause malfunction.
4. Make the glass plate and pan clean before cook, otherwise, dirt after charring is very difficult
to clean and the plate may get discoloration.
5. You may clean air vent / air entry’s dirt by vacuum cleaner to suck up or by cotton. If there is
dirt with oil, add a little litmus less detergent with tooth brush to clean.
6. Don’t use caustic impregnate to clean. It may damage the cook top by chemical reaction.
7. Do not use thinner, scrubbing brush or polishing power to clean the induction cook top.
Trouble Shooting
When the cook top show fault code during working, it means there is something wrong with the
cook top. Below are the fault code and their solutions. Please note “EO” is not a fault code, it
reminds that there is no pot on the cook top
Possible reasons
Trouble code
Low voltage protection
E1
High voltage protection
E2
Cook top surface’s sensor
Short circuit or exceed temperature
E3
Cook top surface’s sensor circuit opened E4
IGBT sensor short circuit or exceed temperature E5
IGBT sensor circuit to opened E6
Resonant loop fault E9
4 5