![background image](http://html1.mh-extra.com/html/koryo/kek-2012/kek-2012_user-manual_1999096005.webp)
Part identification
Operating instructions
1. Spout
2. Lid
3. On/Off power switch
4. Handle
5. Water level window
6. Indicator light
7. Power base electric connector
1
2
3
4
5
6
7
1. Position the power base on a stable, level surface near an electrical outlet.
Unwind the power cord from the cord storage area located beneath the
power base. Make sure the cord exits through the cord exit slot on the side
of the power base.
2. Check that the ON/OFF switch is in the OFF position.
3. Remove the kettle from the power base. Open the lid. Fill
in with fresh, cold water to the desired level. Add water to
at least the MIN water level; do not fill above the MAX
water level. Wipe excess water off the kettle.(Fig.1)
CAUTION: Never add water above the MAX water level.
This could cause boiling water to splatter out.
4. Check to be sure that you have closed the lid properly,
otherwise the kettle may not turn OFF automatically
after boiling.
CAUTION: To avoid the risk of splashing while pouring
hot water; make sure the lid is securely closed onto the
kettle before operation.
5. Place the kettle on the power base, taking care not to
spill any water.(Fig.2)
Before using for the first time
1. Boil water in this electric kettle twice following the Operating Instructions
described in this Instruction Manual.
2. Discard the boiled water. Your kettle is now ready for use.
5
Fig.1
Fig.2