1. Add ingredients and water
Open the mixing chamber and add the ingredients. Please follow this manual to portion ingredients (see
part IV.). Then tighten the mixing chamber lid in place. Open the water tank cover and fill it with filtered
water. Make sure that the water level matches the line that indicates the desired volume. Now place the
cover back on the water tank. Place the beverage container and wastewater basin in the designated po-
sitions.
2. Menu selection
Touch the „Menu“ button to select the desired function. The selected program will flash, and with each
successive touch of the button, the different programs will flash in a cycle from left to right.
3. Capacity selection
Touch the „Capacity“ button to select the desired capacity. Each touch of the button will cycle the
selection between 400 ml, 600 ml, 900 ml, 1200 ml and 1500 ml. The default capacity is 600 ml (0.6L).
The maximum capacity for “Oat milk” and “Almond milk” is 1200 ml.
For smoothies, the only available capacity is 600 ml.
Calibration
If the final volume of the drink deviates from the volume you selected, you can calibrate your appliance
yourself. Make sure that the appliance is placed on a flat and hard surface and the water tank is filled at
least to the “400 ml” line. Put the beverage container under the outlet to catch the water.
Please touch “Menu” and “Capacity” together for 3 seconds to calibrate the water pump. The start is
indicated by 2 two beep sounds. During calibration, the blue light displaying “0.6L” will always be on. This
process will take around 2 minutes.
Once the calibration is finished, you will hear 9 beep sounds and the menu will be displayed with orange
lights. The light of the last program used will flash.
NOTE:
You can opt for a deep cleanse after calibration. For that, long press “Clean/Dry” for 3 seconds to have a
deep clean. Simultaneously, your appliance will detect the altitude of the ground. Please remember that
this product is only designed to use under conditions of 1500 m (or less) above sea level.
4. Time selection (optional)
To enjoy the plant-based drink at a later point in time, a timer can be set for six, eight or ten hours. Touch
the „Timer“ button to select the desired time. The display will show “6h”/“8h” and “10h”, indicating the time
ahead at which your drink will be ready to consume. If you want the machine to start preparing your drink
immediately, you can skip this step by touching the “Start/Cancel” button directly.
5. Start operation
Make sure that the lid of the mixing chamber is well closed. Touch the “Start/Cancel” button to start the
operation. Within the first 30 seconds, you can touch the button again to cancel the current program and
reselect a new one.
NOTE:
Please add the ingredients in the proportions indicated in this instruction manual to avoid overflowing,
clogging or grinding issues.If you are using the smoothie program, please be careful not to add ingredients
with too much fiber to avoid clogging the outlet. Additionally, you should cut your ingredients small.
4. HOW TO USE THE PLANT DRINK MAKER
