______________________________________________________________________________________
External heater hot tub user and maintenance manual
12
4 Operational use
Read this manual before operating the external heater and check the following aspects.
1)
Make sure installation works have been carried out correctly (following this
manual).
2)
The hot tub must be filled with water before starting a fire in the external
heater.
3)
The water level in the hot tub must be at least 5 cm above the higher pipe.
4)
Make sure the drain plugs on the hot tub and heater are closed.
5)
Make sure the hot tub is not leaking.
6)
Make sure the hoses are properly connected.
7)
Make sure that the hot tub, external heater, and their connecting hoses are
properly installed. See images 5, 6 and 7.
To start a fire, place 4–6 logs of suitable length into the heater.
You can use paper, woodchips or flammable blocks to light the fire.
When using the heater (when a fire has already been lit in it), the door of the heater may
only be opened for adding logs.
DANGER!
Leaving the external heater door open after
adding logs may cause a fire.
DANGER!
A fire must not be lit in the external
heater before the hot tub is filled with
water.
DANGER!
Using fire accelerators such as ignition
fluids or other similar fluids and solids is
strictly prohibited. This may cause severe
injuries or death and damage the product.
CAUTION!
Placing objects onto the external heater is
prohibited. Fire hazard!
