Korg TRITON Extreme, Manual

Page: 12 / 354

Program
P0
P1
P2
P3
P4
P5
P7
P8
P9
1
1. Program mode
In this mode you can select and play programs.
All MIDI data in Program P0: Play is transmitted and
received on the Global MIDI Channel “MIDI Channel”
(Global P1: 1–1a).
0–1: Perf. Edit
(Performance Edit)
0–1a: Bank, Program Select, Category, 10’s Hold,
Bank (Bank Select) [A...F, G, g(1)...g(9), g(d), H...N]
This is the program bank display.
Use the BANK [A]–[N] keys to select the bank.
Bank G will advance to the next G (or g) bank each time you
press the [G] key, as shown.
G
→
g(1)
→
g(2)
→
g(3)
→
g(4)
→
g(5)
→
g(6)
→
g(7)
→
g(8)
→
g(9)
→
g(d)
→
G
Bank F can be selected only if you have installed the
EXB-MOSS option. When installed, the 128 special
EXB-MOSS programs will be available.
The TRITON Extreme provides rewritable banks A–E and
H–N
, each containing 128 programs (total 1,536). As non-
rewritable program areas, it provides banks G (basic pro-
grams for GM2), banks g(1)–g(9) (variation programs), and
bank g(d) (drums).
(
☞
A list of the factory-set programs is provided in the sepa-
rate booklet “VNL.”)
* For banks with no variation sounds, the GM basic sounds
will be recalled. (An * will be added at the beginning of
the program name.)
Program Select [(A...F, H...N) 0...127: name,
(G, g(1)...g(9), g(d)) 1...128: name]
Here you can select a specific program. When this parameter
is selected, you can select programs using the [
] [ ]
keys, numeric keys [0]–[9] , or [VALUE] dial.
When you press the popup button, the “Bank/Program
Select” menu will appear. This displays programs by bank,
and allows you to select a program.
You can receive MIDI program changes from a con-
nected external MIDI device, or use a foot switch to
select programs. (“Foot SW Assign” Global P2: 2–1a,
“Foot Switch Assign List”
☞
p.281)
Bank/Program Select menu:
1 Press the popup button at the left of “Program Select” to
access the Bank/Program Select menu.
2 Press one of the tabs at left or right to select a specific
bank.
If you select the GM bank, the Variation button will be
enabled.
Each time you press the Variation button, the bank will
cycle in the order of G
→
g(1)
→
g(2)
→
...
→
g(8)
→
g(9)
→
G.
3 Select a program from the list. You can press the list to
make a selection, or use the [
] [ ] keys.
4 Press the OK button to execute, or press the Cancel but-
ton
to cancel your selection.
Category [00...15]
Selects the program category.
All programs are classified into one of sixteen categories.
You can select the desired category, and then choose pro-
grams from that category. Press the popup button, and the
“Category/Program Select” menu will appear.
Category/Program Select menu:
1 Press the (category) popup button above “Program
Select” to access the Category/Program Select menu.
2 Press one of the tabs at left or right to select the desired
category.
3 Select a program from the list. You can press the list to
make a selection, or use the [
] [ ] keys.
4 Press the OK button to execute, or press the Cancel but-
ton
to cancel your selection.
The category setting of each program can be specified in the
“Write Program” (0–1A) dialog box.
A…D, H…M for preloaded programs
E User programs, such as programs that use RAM
multisamples created in Sampling mode etc.
F for EXB-MOSS programs
G GM2 basic program
g(1)–g(9) GM2 variation programs*
g(d) GM2 drums program
N for preloaded programs, user programs
Program P0: Play
0–1
0–1a
0–1b
0–1c