manualshive.com logo in svg

Korg TRITON Extreme, Manual

The Korg TRITON Extreme, an exceptional synthesizer workstation, offers unparalleled musical versatility and creativity. Unlock its full potential with our comprehensive and user-friendly manual. Simply visit our website to download the latest update instructions, free of charge, ensuring you get the most out of your TRITON Extreme experience.

Share
Download
background image

281

Appendices

The A-mode functions of the REALTIME CONTROLS 
are fixed.

Knob1-A: LPF CUTOFF (Filter LPF Cutoff: CC#74)

Control the low pass filter cutoff frequency of the filter. 
Simultaneously, CC#74 will be transmitted.

Knob2-A: RESONANCE/HPF (Filter Resonance/HPF Cutoff: 
CC#71)

Control the resonance level or the cutoff frequency of the 
high pass filter. If the program “Filter Type” is Low Pass 
Resonance

, the resonance level will be controlled. If “Filter 

Type” is Low Pass & High Pass, the cutoff frequency of the 
high pass filter will be controlled. Simultaneously, CC#71 
will be transmitted.

Knob3-A: EG-Intensity (Filter EG Intensity: CC#79)

Control the filter EG intensity. Simultaneously, CC#79 will 
be transmitted.

Knob4-A: EG-Release (Filter, Amplifier EG Release: CC#72)

Control the release time of the filter and amplifier EG. 
Simultaneously, CC#72 will be transmitted.

You can assign the function of an assignable switch (Korg 
PS-1 option) connected to the ASSIGNABLE SWITCH jack.

• This setting is made in Global P2: Controller “Foot 

Switch Assign” (2–1a).

If you select a function that includes a CC#, that MIDI 
control change message will be transmitted each time 
the switch is turned on/off. (Off: 0, On: 127)
If you select Knob1...4, SW1, or 2, the MIDI control 
change message specified by the Knob1...4 B-Assign 
and SW1/2 Assign settings will be transmitted each 
time the foot switch is turned on or off. (Off: 0, On: 127)

Portamento SW (CC#65)

When the “Oscillator Mode” (Program P1: 1–1a) is Single, 
turning the switch on will apply portamento regardless of 
the P2: Edit-Pitch “Enable” (Program P2: 2–1c) setting, and 
turning the switch off will not apply portamento.
If “Oscillator Mode” is Double, and if the P2: Edit-Pitch 
“Enable” setting is the same for OSC1 and 2 (i.e., Enable or 
Disable for both OSC1 and 2), then portamento will be 
applied to OSC1 and 2 when the switch is turned on, and 
portamento will not be applied to OSC1 and 2 when the 
switch is turned off.
If the P2: Edit-Pitch “Enable” setting is different for OSC1 
and 2 (i.e., OSC1 is Enable and OSC2 is Disable, or OSC1 is 
Disable and OSC2 is Enable), then portamento will be 
applied to the OSC whose setting is Enable when the switch 
is turned on, and portamento will be applied to neither OSC 
when the switch is turned off.

Foot Switch Assign List

Foot Switch Assign

Off

The connected foot switch will not function.

Foot SW (CC#82)

Alternate Modulation or Effect Dynamic Modulation can be controlled. To control these, set “AMS” or “Dmod Src” to Foot 
SW:#82.

Portamento SW (CC#65)

Control portamento on/off.

Sostenuto (CC#66)

Control the sostenuto effect (which holds only the keys (Note No.) that were being held at the moment that the pedal 
switch was turned on).

Soft (CC#67)

Turn the soft pedal effect on/off.

Arpeggio SW

Turn the arpeggiator on/off. The NRPN message [Bn 63 00 Bn 62 02 Bn 06 00 (off) or 7F (on)] will be transmitted each 
time this is turned on/off.

Program Up

The switch can be used to select programs or combinations. When in Program P0: Play, the program that follows the cur-
rently selected program will be selected. When in Combination P0: Play, the combination that follows the currently 
selected combination will be selected. Simultaneously, a Bank Select message and Program Change message will be 
transmitted.

Program Down

The switch can be used to select programs or combinations. When in Program P0: Play, the program that precedes the 
currently selected program will be selected. When in Combination P0: Play, the combination that precedes the currently 
selected combination will be selected. Simultaneously, a Bank Select message and Program Change message will be 
transmitted.

Song Start/Stop

The switch can be used to start/stop the Sequencer, Song Play modes. Simultaneously, a MIDI Start or Stop message 
will be transmitted.

Song Punch In/Out

If Sequencer P0: Preference “Recording Setup” (0–7a) is set to Manual Punch In, the switch can be used to punch-in 
and punch-out when recording on the sequencer.

Cue Repeat Control

This can be used if in Sequencer P1: Cue List, the “Repeat” (1–1d) setting of each step has been set to FS. Turning the 
pedal switch on while that step is repeating will be the trigger for advancing to the next step. When the end of the song is 
reached, this will advance to the next step (song).

JS+Y (CC#01)

The switch will control the effect produced by joystick movement in the +Y direction (Vertical upward).

JS–Y (CC#02)

The switch will control the effect produced by joystick movement in the –Y direction (Vertical downward).

Ribbon (CC#16)

The switch will control the effect of the ribbon controller.

Slider (CC#18)

The switch will control the effect of the [VALUE] slider.

Knob 1...4

The switch will control the effect of REALTIME CONTROLS knobs [1]–[4]. (On produces the same effect as when the 
knob is rotated fully right, and Off as when it is rotated fully left.)

SW1, 2

The switch will control the effect of the [SW1] and [SW2] keys.

TAP TEMPO

This switch can be used to control the tempo of the arpeggiator or song in realtime.

Summary of Contents for TRITON Extreme



































































































































































































































































































































































Reviews:

No comments

Related manuals for TRITON Extreme

Qoltec 7991 Installation & User Manual preview
7991
Brand: Qoltec Pages: 5
TE-Group mr Handsfree Blue iCover Mini User Manual preview
mr Handsfree Blue iCover Mini
Brand: TE-Group Pages: 6
Zagg Cover-Fit Instructions Manual preview
Cover-Fit
Brand: Zagg Pages: 8
Sonics VCX134ATA Operation Manual preview
VCX134ATA
Brand: Sonics Pages: 19
Truly Ergonomic TEK 207 Installation & Quick Start Manual preview
TEK 207
Brand: Truly Ergonomic Pages: 2
Impulse Novation Getting Started Manual preview
Novation
Brand: Impulse Pages: 8
Yamaha AVP-007 Owner'S Manual preview
AVP-007
Brand: Yamaha Pages: 2
Yamaha Basics Basics preview
Basics
Brand: Yamaha Pages: 4
Yamaha Arius YDP-160 Quick Operation Manual preview
Arius YDP-160
Brand: Yamaha Pages: 2
Yamaha CE20 Owner'S Manual preview
CE20
Brand: Yamaha Pages: 11
Yamaha BC245XLT Owner'S Manual preview
BC245XLT
Brand: Yamaha Pages: 12
Yamaha 370 Installation Manual preview
370
Brand: Yamaha Pages: 9
Yamaha Arius YDP-C71 Owner'S Manual preview
Arius YDP-C71
Brand: Yamaha Pages: 38
Yamaha CBX-K3 Owner'S Manual preview
CBX-K3
Brand: Yamaha Pages: 47
Yamaha Arius YDP-S31 Owner'S Manual preview
Arius YDP-S31
Brand: Yamaha Pages: 44
Yamaha Arius YDP-140 Owner'S Manual preview
Arius YDP-140
Brand: Yamaha Pages: 44
Yamaha ARIUS YDP-145 Owner'S Manual preview
ARIUS YDP-145
Brand: Yamaha Pages: 48
Yamaha CBX-K1XG Owner'S Manual preview
CBX-K1XG
Brand: Yamaha Pages: 72

Brands by name

Popular brands

Load more brands