5
1. Introduction
LCD and control panel
1
Name display
This shows the program name, effect
name, or parameter name, as appropri-
ate for each operation.
2
Edit icon
This will light if the selected program has been edited. It will blink if the program is
currently being edited.
3
Phrase trainer icon
This will blink when you are in
Phrase Trainer mode
.
4
Metronome icon
This will light when the metronome is on. It will blink while the metronome tempo or
level is being adjusted.
5
MASTER/VALUE display
This shows the master level and parameter values. When the parameter value matches
the value that is written in the program, the
ORIG
(original icon) will light.
6
NR-PRG LEVEL switch
Use this switch to adjust the amount of noise reduction or the level of each program.
7
RENAME switch
Use this switch to change the name of a program.
8
Metronome LED
This LED will blink in time with the metronome tempo.
9
WRITE switch
Use this switch to save an edited program.
0
EXIT switch
From any function, you can press this to return to
Play mode
.
A
Cursor switches ( , )
Use these switches to select the parameter that you wish to edit, or when modifying the
name of a program.
B
MASTER/VALUE switches (
▲
,
▼
)
Use these switches to change the master level or the value of a parameter.
C
Pedal LED
This indicates the on/off status and type of the pedal effect, and the recording status
when the Sample & Play function is used.
D
Bank number display
This shows the bank number of the selected program. When a user program is selected, a
decimal point “
.
” located at the lower right of the bank number will light.
