6
Saving the settings
After changing settings, if you turn off the power or select another scene without saving it, the changes
will be lost. If you want to use the changed settings again, you should save the data to the taktile/TRI-
TON taktile.
While they are being saved, do not turn off the power. Otherwise, the data may get corrupted.
TIP
The performance parameters cannot be saved. At power-on, the default performance param-
eters will be loaded.
Scene parameters
1.
While holding down the EXIT button, press the SETTING button to enter the scene parameter
save screen.
2.
Name the scene.
Navigate through characters with the page / buttons, and specify a character with the val-
ue slider.
When the setup is complete, press the page button at the last character to go to the next
screen.
3.
Specify a scene number in the destination.
Select a number in the destination with the value slider, and press the page button.
4.
When the confirmation screen is displayed, press the page button to save the data. To can-
cel saving the data, press the EXIT button to return to the Performance screen. If you press the
page button, it will return to the previous page.
The scene parameters will be saved and you will be taken to the performance screen automati-
cally.
While the writing screen is displayed, do not turn off the power of the taktile/TRITON taktile.
Global parameters
When you exit the settings screen by pressing the EXIT button, the global parameters will be saved
automatically.
While the writing screen is displayed, do not turn off the power of the taktile/TRITON taktile.
