Connecting a Pa-Series instrument to an external controller |
29
Connecting a studio controller to send more controls at
the same time
You can connect an external controller incorporating several different con-
trols, conceived for a complex studio configuration. For example, the KORG
nanoKEY Studio includes a keyboard, a set of knobs, an X/Y pad, a set of
pads and a series of programmable switches. Each of them can send data to
a Pa-Series instrument.
Configure the external controller
1
Program the external controller to match the parameters you want to con-
trol in the Pa-Series instrument.
With the nanoKEY Studio and devices of the same type, program the various
controls by using the KORG KONTROL Editor software, that you can freely
download from our
Make each control of the external controller send data on separate MIDI chan-
nels, according to the programming suggested below. For example, make
the knobs adjust the volume of the Upper and Accompaniment Sounds, the
keyboard play the Upper 2 Sound, the XY pad change the filter’s Brightness
and Resonance of the Upper 1 Sound, and the pads play percussive sounds
or effects on the Upper 3.
Devices like the KORG nanoKEY Studio allow for saving programming to dif-
ferent Scenes, to be recalled when needed. So, you can make different pro-
gramming, and save them in different scenes.
