8
7
En
Checking after assembly
After assembling the kit and before turning on the power, make sure
to check the following.
• Are the parts mounted in the correct direction?
• Is the kit built securely, without wobbling?
Troubleshooting
Extra parts remaining, or parts missing.
There are more screws than the number that will be used.
If any parts are missing, contact your local Korg distributor.
If any parts are damaged or missing before beginning the assem
-
bly procedure, contact your local Korg distributor.
The unit makes an abnormal sound when tilted or shaken
after assembly.
A loose screw or other part might have been left inside the unit.
Open the unit and check the inside.
The device does not turn on.
In step 4 (1), the pin positions may be misaligned when inserting
the circuit board. Make sure that the pins are in the proper position
when inserting.
In step 3 (3), the flat cable may not be inserted correctly into the
connector. Make sure that the flat cable is inserted into the connec
-
tor.
4
ⒶⒺ
Make sure that the circuit boards for (1) are not
misaligned when inserting.
The section on
Ⓑ
with holes indicated by an
arrow
is the rear side.
。
5
ⒸⒹ
6
Refer to the following when attaching a custom sideboard.
SC1
SC1
SC1
SC1
(1)
(2)
SC1
: 4
SC2
SC2
SC2
SC2
SC2
: 8
e
e
52mm
Ø
2.4mm