Korg NAUTILUS Series, Parameter Manual, Page: 867 / 961

Reverb and Early Reflections 105: Reverb Room
857
Pre Delay Thru [%] [0…100]
The un-delayed input is mixed together with the Pre Delay
output, and the result is fed into the reverb. Pre Delay Thru
controls the level of the un-delayed input (the Pre Delay
level is always at maximum). The mix of the delayed and un-
delayed signals can create a more dense, natural timbre.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
“OUTPUT” on page 762.
105: Reverb Room
This room-type reverb emphasizes the early reflections that
make the sound tighter. Changing the balance between the
early reflections and reverb sound allows you to simulate nuances, such as the type of walls of a room. For detailed
explanations of the parameters, see “106: Reverb Bright
Room” on page 857.
106: Reverb Bright Room
This room-type reverb emphasizes the early reflections that
make the sound brighter. See 056: Reverb Room.
Pre EQ
Trim [0…100]
Sets the EQ input level.
LEQ Fc [Low, Mid-Low]
Selects the cutoff frequency (low or mid-low) of the low-
range equalizer.
LEQ Gain [dB] [–15.0…+15.0]
Sets the gain of the Low EQ.
HEQ Fc [High, Mid-High]
Selects the cutoff frequency (high or mid-high) of the high-
range equalizer.
HEQ Gain [dB] [–15.0…+15.0]
Sets the gain of the High EQ.
REVERB
Reverb Time [sec] [0.1…3.0]
Sets the reverberation time.
High Damp [%] [0…100]
Sets the amount of high-frequency attenuation.
Pre Delay [msec] [0…200]
Sets the delay time from the dry sound. p.856.
Pre Delay Thru [%] [0…100]
Sets the mix ratio of non-delay sound. p.857.
ER Level [0…100]
Sets the level of early reflections. See “Reverb Level,”
below.
Reverb Level [0…100]
Sets the level of the main reverberation.
Together, the ER Level and Reverb Level allow you to
model the type of walls in the room. A larger ER Level
simulates a hard wall, and a larger Reverb Level simulates a
soft wall.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
“OUTPUT” on page 762.
Time
Reverb - Hall / Plate Type
Level
Louder
Dry
Reverb
Pre Delay Thru
Pre Delay Reverb Time
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
LEQ HEQ
Pre Delay
Reverb
Reverb Level
ER Level
ER Level
Pre Delay Thru
ERs
ERs
Reverb - Room Type
Time
Level
Louder
ER
(Early Reflections) Dry
Reverb
Pre Delay Thru
Pre Delay Reverb Time