8
Mark jump function added, with caution
In the Mark Edit screen, a "Jump" function has been added, along with a caution for when
registering or editing marks that depend on the project format. (See owner's manual p.22 "Ed-
iting marks.")
Mark jump
1. Use the P-dial to select and confirm the move-destination mark in the Mark List
screen.
The Mark Edit screen will appear.
2. When you select and confirm "Jump," the current location will move to the mark
time location and the display will automatically return to the meter screen.
Push
Push
You can also edit the time location of a mark (owner's manual p.22 "Editing the time
location of a mark") and then select and confirm "Jump" to move to the newly edited
mark time.
Caution when registering a mark and editing the time
(owner's manual p.21 and 22)
For a WAV, DFF, or WSD project, you can register and edit marks at any time location;
however for a DSF project, you can only register and edit marks at a minimum interval of
approximately 11.6 ms.
For an MP3 project, you can only register and edit marks at a minimum interval of 26.1 ms.
When you edit the time location, it will automatically be adjusted to the closest location that
satisfies these conditions.
Change in the screen while recording
The screen display while in the record-ready state and during recording has been changed.
During recording
During record-ready