Korg M50-73 Parameter Manual Download

Page: 268 / 419

Media mode

260

0–2: Save

Here, you can save various data types from internal memory
to media.

Use the

Open button

and

Up button

to move to the desired

directory (i.e., change the current directory), and then select
the desired menu command.

When you execute a Save operation, the data will be saved
in the same level of the hierarchy as the files that are
displayed.

The M50 does not contain an internal calendar or clock,
you must use Utility menu command

Set Date/Time

set the date and time before saving the file.

▼

0–2: Menu Command

• 0:

Hide unknown files

☞

p.262

• 1:

Lock/Unlock selected

• 2:

• 3:

Save All (PCG & SEQ)

• 4:

• 5:

• 6:

Save to Standard MIDI File

• 7:

For more information, please see “Media: Menu Command”
on page 262.

0–3: Utility

Here, you can rename, copy, or delete the selected media or
file, create a new directory, format, and set the date and
time.

After selecting media or a file, select the desired menu
command.

▼

0–3: Menu Command

• 0:

Hide unknown files

☞

p.262

• 1:

Lock/Unlock selected

• 2:

• 3:

• 4:

• 5:

• 6:

• 7:

• 8:

For more information, please see “Media: Menu Command”
on page 262.

0–1a

0–1b

0–1c

0–2
Menu

0–1a

0–1b

0–1c

0–3
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Search results

Summary of Contents for M50-73

Reviews:

Related manuals for M50-73

Brands by name

Popular brands

Korg M50-73, Parameter Manual

Search results

Summary of Contents for M50-73

Reviews:

Related manuals for M50-73

Brands by name

Popular brands