manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 247

Global P5: Drum Kit 5–8: Velocity Split

239

5–8: Velocity Split

5–8a: Velocity Split

This page graphically shows the zone and crossfade 
settings. Edit the drum sample settings while watching both 
the Sample Setup page and the Velocity Split page.

DS1(High): (Drumsample1 High)

DS1(High) On/Off

[Off, On]

Bottom Velocity

[001…127]

Xfade Range

[Off, 001…127]

Curve

[Lin(Linear), Pwr(Power), Lyr(Layer)]

In the section “DS1 (High): (Drumsample 1 High)” of “5–1b: 
Drumsample” on page 234, please see DS1 (High) On/Off, 
Bottom Vel (Bottom Velocity), Xfd (Xfade Range), and Xfade 
Curve.

DS2(M Hi): (Drumsample2 Mid High)

DS3(M Lo): (Drumsample3 Mid Low)

DS4(Low): (Drumsample4 Low)

“5–1b: Drumsample” on page 234, please see DS2(M Hi): 
(Drumsample2 Mid High), DS3(M Lo): (Drumsample3 Mid 
Low), and DS4(Low): (Drumsample4 Low).

▼

5–8: Menu Command

• 0: 

Write Drum Kits

☞

p.255

• 1: 

Rename Drum Kit

☞

p.255

• 2: 

Copy Drum Kit

☞

p.255

• 3: 

Copy Key Setup

☞

p.255

• 4: 

Swap Key Setup

☞

p.255

For more information, please see “Global: Menu Command” 
on page 251.

Editing Drum Kits

Before you start editing…

Drum Program selection

Drum Kits are edited in Global mode. While you’re in 
Global mode, you’ll play the kit that you’re editing as if you 
were playing it from within the Program, Combination, or 
Song which was selected before you entered Global mode.

So, before you enter Global mode, it’s best to select a 
Program which is already set up for drums, with the 
appropriate EG settings, effects, and so on. Just use the 
Program Category select popup, and choose a drum 
Program. You’ll probably want to start from Program mode, 
press the Category popup button to access the Category/
Program Select menu, and choose a drum kit program from 
the Drums category.

OSC1/Basic Octave setting

The Oscillator’s 

Octave

 setting needs to be 

+0 [8']

. All Drum 

Kit Programs should have this setting already. If you’re 
unsure, you can check this yourself: 

1. Access the Prog P2: OSC/Pitch– OSC1 Basic page.

2. Check that the Oct (Octave) parameter (near the top of 

the page) is set to +0 [8'].

With a setting other than 

+0 [8']

, the relationship between 

the keys and the Drum Kit sound map will be incorrect.

Make sure that Memory Protect is disabled

Before you start editing, go to the Global P0: Basic Setup– 
System Preference page, and look in the Memory Protect 
section. Make sure that 

Drum Kit

 is not checked 

(protected)–if so, you won’t be able to make any edits.

Drum Kits may be used by more than one Pro-
gram

When you edit a Drum Kit, all Programs that use that Drum 
Kit will be affected. To avoid changing the factory voicing, 
you may wish to copy Drum Kits to empty locations in the 
USER banks before editing.

Backing up a Drum Kit

Global mode does not have a Compare function that returns 
the edited result to the state prior to editing. Before you 
begin editing a user Drum Kit, it’s a good idea to use 

Copy 

Drum Kit

 to copy that Drum Kit to a vacant number.

5–1a

5–8a

5–8
Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands