manualshive.com logo in svg

Korg M50-73, Parameter Manual

Share
Download
Korg M50-73 Parameter Manual Download Page 150

Sequencer mode

142

SEQ P0–2: Play/REC Control

0–2–1: ARP A (Arpeggiator A), 
0–2–2: ARP B (Arpeggiator B)

Here, you can make arpeggiator settings for the song. A 
song can run two arpeggiators simultaneously. 

Arpeggiator parameters can be edited in P7: Arpeggiator/
Drum Track, but certain major parameters can be edited in 
these pages as well. You can edit these parameters in 
realtime, for example by changing the arpeggio pattern 
while playing in Sequencer P0–1:Play/REC.

You can also use the TEMPO knob and the control surface 
arpeggio control (ARP) GATE knob, VELOCITY knob, 
LENGTH knob, and OCTAVE knob to control the 
arpeggiator in realtime.

0–2–1(2)a: Track Select, Tempo, RPPR

Track Select

[Track01…16, Master Track]

 (Tempo)

[040.00…300.00, EXT]

RPPR

[Off, On]

Here, you can select the track, specify the tempo that will 
control the song or arpeggiator etc., and turn RPPR on/off.

For more information, please see “0–1–1(2)a: Location, 
Meter, Tempo, Tempo Mode, Song Select, Track Select, Reso, 
RPPR” on page 129.

0–2–1(2)b: Arpeggiator Run, Track assign

Arpeggiator Run A, B

When the ARP ON/OFF switch is on, the arpeggiator(s) you 
checked here will run if they are assigned to a timbre by 

Arpeggiator Assign

 (7–1(2)c).

When the arpeggiator is on, these check boxes let you turn A 
and B on/off.

This parameter can also be set from P7: ARP/DT page 

Arpeggiator Run A, B

.

Track assign

This indicates the arpeggiator A and B assignment status for 
each track 1–8. These settings are made in 

Arpeggiator 

Assign

 (Seq 7–1(2)c).

0–2–1(2)c: Arpeggiator A (B)

Pat (Pattern)

[P0...P4, U0000(INT)...U0899(INT),

U0900(USER)...U1027(USER)]

Octave

[1, 2, 3, 4]

Reso (Resolution)

[

 

 ,  

 ,  

 

 ,  

 ,  

 

 ,  

 ]

Sort

[Off, On]

Latch

[Off, On]

Key Sync.

[Off, On]

Keyboard

[Off, On]

Set the various parameters of the combination arpeggiator. 
For more information, please see “COMBI P7: Arpeggiator/
Drum Track” on page 107.

These parameters can also be set from 7–3(4): Arpeggiator 
A(B) Setup.

▼

0–2–1(2): Menu Command

• 0: 

Memory Status

☞

p.191

• 1: 

Exclusive Solo

☞

p.73

• 2: 

Rename Song

☞

p.191

• 3: 

Delete Song

☞

p.191

• 4: 

Copy From Song

☞

p.191

• 5: 

Load Template Song

☞

p.191

• 6: 

Save Template Song (Save as User Template 
Song)

☞

p.192

• 7: 

FF/REW Speed

☞

p.192

• 8: 

Set Location (Set Location for Locate Key)

☞

p.192

• 9: 

GM Initialize

☞

p.193

• 10: 

Copy From Combi (Copy from 

Combination)

☞

p.194

• 11: 

Copy from Program

☞

p.195

• 12: 

Copy Arpeggiator

☞

p.75

For more information, please see “Sequencer: Menu 
Command” on page 191.

0–2

–1a

0–2

–1b

0–2

–1c

0–2

–1

Menu

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands