Home
/
Korg
/
M50-73
/
Parameter Manual

Korg M50-73, Parameter Manual

Share

Page: 103 / 419

Korg M50-73 Parameter Manual Download Page 103

COMBI P3: Timbre Param (Timbre Parameters) 3–1: MIDI T01–08, 3–2: MIDI T09–16

95

COMBI P3: Timbre Param (Timbre Parameters)

3–1: MIDI T01–08,
3–2: MIDI T09–16

Here, you can make MIDI settings for timbres 1–8 and 9–16.

3–1(2)a: Combination Name, Tempo
3–1(2)b: Timbre Info

For more information, please see “2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16” on page 93.

3–1(2)c: MIDI

Timbre 01 (Timbre Number):

Status

[Off, INT, EXT, EX2]

This sets whether the Timbre controls the internal sounds, or
external MIDI devices.

When controlling external MIDI devices, you can choose
between using the internal Bank Select numbers (as set by
the front-panel switches), or using custom Bank Select
settings to match the external device.

Off:

Use this to disable the Timbre. With this setting, the

Timbre’s Program will not sound, and MIDI data will not be
transmitted.

INT:

The timbre will sound, and will also sound in response

to MIDI messages from an external MIDI device. MIDI data
will not be transmitted.

EXT:

The timbre will not sound even if it receives messages

from a controller, but MIDI data will be transmitted to
external devices.

EX2:

Use this to play an external MIDI device, with custom-

set

Bank Select

via the

Bank Select (When Status=EX2)

LSB

and

MSB

parameters, on the

MIDI

tab of the

Timbre

Parameters

page. In all other ways, this is the same as EXT.

MIDI Channel

[01...16, Gch]

Sets the MIDI transmit/receive channel for each timbre.

Gch:

The timbre will use the channel that has been selected

as the global

MIDI Channel

(Global 1–1a).

When

Status

is INT, MIDI messages will be received on the

channel you specify here. If this setting is the same as the
global MIDI channel, the internal tone generator will sound
according to the internal settings. If this is set to EXT or EX2,
playing the M50 will transmit MIDI messages on the MIDI
channel specified here. (Messages will also be transmitted
simultaneously on the global MIDI channel.)

Bank Select (When Status = EX2) MSB [000...127]

Bank Select (When Status = EX2) LSB [000...127]

Specifies the bank number that will be transmitted when

Status

is set to EX2. The upper line is the MSB, and the

lower line is the LSB. This setting has no effect if

Status

is

other than EX2.

Timbre 02...08, 09...16 (Timbre Number):

These are the MIDI-related settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see “Timbre 01 (Timbre Number):,” above.

▼

3–1(2): Menu Command

• 0:

Write Combination

• 1:

Exclusive Solo

• 2:

Copy from Program

For more information, please see “Combination: Menu
Command” on page 120.

3–1a

3–1c

3–1b

3–1
Menu

MIDI IN/
USB B

INT

MIDI OUT/
USB B

EXT, EX2

Tone
generator

«
...
101
102
103
104
105
...
»

Summary of Contents for M50-73




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands