Korg M3, Parameter Manual

Page: 533 / 647

Double Size
523
169: St. BPM Long Dly
(Stereo BPM Long Delay)
The stereo delay enables you to match the delay time with
the song tempo.
a: Time Over? L, R
You can set the delay time up to 5,460msec. If the delay time
exceeds this limit, the error message “OVER!” appears in the
display. Set the delay time parameters so that this message
will not appear. Time Over? is only a display parameter.
170: Early Reflections
This early reflection effect has more precise early reflections
with twice the maximum length of a normal-size effect (see
p.487, 076: Early Reflections). You can create a very smooth
and dense sound.
a
BPM
MIDI,
40.00...
300.00
MIDI syncs to the system
tempo; 40–300 sets the tempo
manually for this individual
effect
p.473
Time Over? L ---, OVER!
Display the error message if the
left channel delay time exceeds
the upper limit
p.523
R ---, OVER!
Display the error message if the
right channel delay time
exceeds the upper limit
p.522
b
L Delay Base
Note
...
Selects the type of notes to
specify the left channel delay
time
p.473
Times x1...x32
Sets the number of notes to
specify the left channel delay
time
p.473
Adjust [%] –2.50...+2.50
Fine-adjust the left channel
delay time
c
R Delay Base
Note
...
Selects the type of notes to
specify the right channel delay
time
p.473
Times x1...x32
Sets the number of notes to
specify the right channel delay
time
p.473
Adjust [%] –2.50...+2.50
Fine-adjust the right channel
delay time
d
L Feedback –100...+100
Sets the feedback amount for
the left channel
Src Off...Tempo
Selects the modulation source
of feedback amount
L Amt –100...+100
Sets the modulation amount of
the left channel feedback
e
R Feedback –100...+100
Sets the feedback amount for
the right channel
R Amt –100...+100
Sets the modulation amount of
the right channel feedback
f
High Damp
[%]
0...100
Sets the damping amount in
the high range
p.476
g
Low Damp
[%]
0...100
Sets the damping amount in
the low range
p.476
h
Input Level
Dmod [%]
–100...+100
Sets the modulation amount of
the input level
p.472
Src Off...Tempo
Selects the modulation source
for the input level
p.472
i
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount
for Wet/Dry
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Tempo
BPM
BPM
Base Note x Times Adjust [%]
Base Note x Times Adjust [%]
Delay
Delay
a Type
Sharp, Loose,
Modulated,
Reverse
Selects the decay curve for the
early reflection
p.487
b
ER Time
[msec]
10...1600
Sets the time length of early
reflection
c
Pre Delay
[msec]
0...200
Sets the time taken from the
original sound to the first early
reflection
d EQ Trim 0...100
Sets the input level of EQ
applied to the effect sound
e
Pre LEQ Fc
Low,
Mid-Low
Selects the cutoff frequency
(low or mid-low) of the low-
range equalizer
Pre HEQ Fc
High,
Mid-High
Selects the cutoff frequency
(high or mid-high) of the high-
range equalizer
f
Pre LEQ Gain
[dB]
–15.0...+15.0 Sets the gain of Low EQ
Pre HEQ Gain
[dB]
–15.0...+15.0 Sets the gain of High EQ
g
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount
for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
Pre Delay
Early Reflections
LEQ HEQ