manualshive.com logo in svg

Korg M3, Parameter Manual

Share
Download
Korg M3 Parameter Manual Download Page 338

Sampling mode

328

9–2: MFX1

9–2a: MFX1

Here you can edit the parameters of the effect you choose for 
MFX1 in the P9: MFX/TFX– Routing page.

Effect dynamic modulation (Dmod) is controlled on the 
global MIDI Channel (Global 1–1a). For more 
information, please see “Dynamic modulation (Dmod) 
and Tempo Synchronization” on page 422.

MFX1 On/Off

[Off, On]

This turns master effect 1 on/off. It is linked with the on/off 
setting in the P9: MFX/TFX– Routing page.

P (Effect Preset)

[P00, P01...15, U00...15, ---------------]

This lets you select presets for the current effect. For more 
information, please see “P (Effect Preset)” on page 101.

MFX1 Parameters

Here you can edit the parameters of the master effect 
selected in the P9: MFX/TFX– Routing page.

For more details, please see “Master Effects (MFX1, 2)” on 
page 432.

▼

9–2: Menu Command

• 0: Panel–SW Solo Mode On

☞

p.329

• 1: Exclusive Solo

☞

p.329

• 2: Copy MFX/TFX

☞

p.352

• 3: Swap MFX/TFX

☞

p.353

• 4: Write FX Preset

☞

p.353

For more information, please see “Sampling: Menu 
Command” on page 329.

9–3: MFX2,
9–4: TFX

These pages let you edit the parameters of Master Effect 2 
and the Total Effect. To select different effects types, use the 
P9: MFX/TFX– Routing page.

The parameters for MFX2, TFX are the same as for MFX1. 
For more information, please see “9–2: MFX1,” above.

9–2a

9–2
Menu

Summary of Contents for M3








































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands