manualshive.com logo in svg

Korg GEC3, User Manual

Share
Download
Korg GEC3 User Manual Download Page 56

Group Mode 

56 

Note: 
If you are eavesdropping on or communicating with a group and you press on a student in 
another student group, you will end your session with the first group, as you cann ot 
eavesdrop on or communicate with more than one group at a time in Group mode. 

Load Group Screen 

The 

Load Group

 screen can be accessed from the 

Play

 tab in 

Group

 mode via the small 

dropdown arrow in the top right corner of the screen. The name of the active configuration 
appears next to the arrow (for example, Duet, Config 1 or the name of a custom configured 
group). 

How to load group info 

1.  Press the dropdown arrow on the top right corner of the 

Play

 tab. The following screen 

displays, listing all the default configurations and any custom configured groups (up to 4 
custom groups can be created for each class stored in the GEC3 - see the 

Setup 

tab 

section in this chapter for information on how to configure custom, recallable groups). 
 
 The 

Load Group

 screen displays. It looks like this: 

 

  

Figure 12 

2.  Select from the following fields: 

 

Summary of Contents for GEC3































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands