Korg Electronic Keyboard Parameter Manual Download

Page: 481 / 1127

Sequencer P2: Track Parameters 2–4: Delay

471

2–3b: Scale

Scale

Specifies the scale that the song will use. For more
information, please see “1–1g: Scale” on page 36.

Type (Song’s Scale)

[Equal Temperament…User

Octave Scale15]

Selects the scale.

Key

[C…B]

Selects the tonic key of the selected scale.

Random

[0…7]

As this value is increased, an increasingly random
deviation will be added to the pitch at each note-on.

Status

(2–1a) is INT, this setting will affect the

pitch produced by the OASYS. If

Status

is EXT, this

setting will affect the note number of the note
messages transmitted via MIDI.

▼

2–3: Page Menu Commands

The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.

• 0:

Memory Status

. For more information, see

“Memory Status” on page 524.

• 1:

Exclusive Solo

. For more information, see

“Exclusive Solo” on page 138.

• 2:

Rename Song

. For more information, see

“Rename Song” on page 524.

• 3:

Delete Song

. For more information, see “Delete

Song” on page 524.

• 4:

Copy From Song

. For more information, see

“Copy From Song” on page 524.

• 5:

Load Template Song

. For more information, see

“Load Template Song” on page 524.

• 6:

Save Template Song

. For more information, see

“Save Template Song” on page 525.

• 7:

FF/REW Speed

. For more information, see

“FF/REW Speed” on page 525

• 8:

Set Location

(for Locate Key.) For more

information, see “Set Location (for Locate Key)” on
page 525.

• 9:

GM Initialize

. For more information, see “GM

Initialize” on page 526.

• 10:

Copy From Combination

. For more

information, see “Copy from Combination” on
page 526.

• 11:

Copy From Program

. For more information, see

“Copy From Program” on page 526.

• 12:

Detune BPM Adjust

. For more information, see

“Detune BPM Adjust” on page 535.

2–4: Delay

This specifies the time (delay) from when the MIDI
track receives a note-on until the sound begins.

1–1a

0–1a

2–4a

2–4PMC

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Electronic Keyboard

Reviews:

Related manuals for Electronic Keyboard

Brands by name

Popular brands

Korg Electronic Keyboard, Parameter Manual

Search results

Summary of Contents for Electronic Keyboard

Reviews:

Related manuals for Electronic Keyboard

Brands by name

Popular brands