9
PTN. CHANGE LOCK ............................................................. [Off, On]
Limits how the VALUE knob will change patterns in the pattern
select screen.
Off: The pattern changes when you operate the VALUE knob.
On: The pattern changes when you operate the VALUE knob
while holding down the Shift button.
CHAIN MODE ........................................................................ [Off, On]
Turning this parameter On enables the CHAIN MODE.
If this parameter is set to Off, the individual CHAIN TO and CHAIN
REPEAT parameters of each Pattern will have no effect.
XY CALIBRATION
Calibrates the operating range of the touch pad.
Following the procedure described in the display, touch the lower
left and upper right corners of the touch pad to specify the operable
region.
7. DATA UTILITY
These functions let you write data to or read data from a memory
card, update the system, or return the instrument to the factory-set
state.
EXPORT PATTERN
This function exports the currently selected pattern to the memory
card.
The file is exported in the format of KORG\electribe sampler\
[pattern number]_[pattern name].e2spat. If an identically-named file
already exists, it is overwritten.
TIP
If an identically-named file already exists, it is overwritten.
TIP
If the pattern is being edited, the edited form of the pattern is
exported even if you have not yet pressed the Write button to
save it.
EXPORT ALL PATTERN
This function exports all patterns and global parameters to the
memory card as a single file. The exported file is KORG\electribe
sampler\electribe_sampler_allpattern.e2sallpat on the memory card.
If an identically-named file already exists, it is overwritten.
IMPORT PATTERN
This function imports a pattern file (.e2spat file) that was exported
by the EXPORT PATTERN function.
SELECT SOURCE .........................................................[Card, Sync In]
Selects the import source. You can select either the memory card
or data input from the Sync In jack. If importing from the
memory card, specify an .e2pat format file.
IMPORT ALL PATTERN
From the memory card, this function imports all patterns and global
parameters contained in an .e2sallpat file that was exported by the
EXPORT ALL PATTERN function.
INITIALIZE PATTERN
This function initializes all data of the currently selected pattern.
Each part’s sound data and sequence data including motion se-
quence data, as well as the tempo, length, and beat are reset to the
initial state.
EXPORT AUDIO
This function exports the currently selected pattern to the memory
card as WAV files.
The files are exported to the KORG\electribe sampler\[pattern num-
ber]_[pattern name] Project\Audio folder of the memory card.
SELECT TYPE .............................. [Ableton Live Set, WAV File Only]
Selects the file format that is exported.
Ableton Live Set:
In addition to the WAV files, an Ableton live
project file (.als file) is also exported.
If there are more than nine parts in which the trigger is turned
on for any step, a separate Lite.als file for Ableton Live Lite is
also exported.
TIP
: The .als file for Ableton Live Lite is a project file containing
up to eight parts in which a trigger-on has been recorded,
starting with part 1.
WAV File Only:
Only WAV files are exported. An Ableton Live
project file is not exported.
EXPORT P.SET AUDIO
Using this function, patterns that are registered as a pattern set can
be exported as WAV files.
Specify the range of set numbers for which patterns registered as a
pattern set are exported as WAV files.
The files are exported to the KORG\electribe sampler\PatternSet
Project\Audio folder of the memory card.
