7.A/D(volume) Check (others)
Confirm that you can move the volumes smoothly.
Fig..17<LOOP LENGTH>
1.<LOOP LENGTH> → 2.<MASTER FX>
(11points' clicks The click points are <left>1-2-3-4-5-6-7-8-9-10-11<right>)
(0) Confirm that the segments display is like Fig.17-18.
Fig..18<MASTER FX>
(1) Set the volume to the position of "11".
(2) "10" is displayed in the segments LED, then set the volume to the position of "10".
(3) "6" is displayed in the segments LED, then set the volume to the position of "6".
(4) "2" is displayed in the segments LED, then set the volume to the position of "2".
Fig.19< X >
(5) "1" is displayed in the segments LED, then set the volume to the position of "1"
(left end)
The segments display becomes Fig.17-18, then the check proceeds to the next.
Fig.20< Y >
3.<X> → 4.<Y>
(0) Confirm that the segments display is Fig.19-20.
Do the check same as the <TIME> volume (1) and (2).
The segments display becomes Fig.20-21, then the check proceeds to the next.
Fig.21<SAMPLE MIX FADER>
5. <FX & SAMPLE MIX FADER>
(0) Confirm that the segments display is Fig.21.
(1) Set the FADER knob to the MAX (top).
Fig.22<BOOTH VOL>
(2) The LED of MASTER L +18 has turned ON, then set the FADER to MIN(bottom)
The segments display becomes Fig.22, then the check proceeds to the next.
6.<BOOTH VOL> → 7.<MASTER VOL> → 8.<MONITOR BAL>
Fig.23<MASTER VOL>
→(Front)9.<X-FADER CURVE> → 10.<CH FADER CURVE> (without click)
(0) Confirm that the segments display is like Fig.22-26.
Do the check same as the <TIME> volume (1) and (2).
Fig.24<MONITOR VOL>
The segments display becomes Fig.23-27, then the check proceeds to the next.
11.<EQ SELECTOR > (11points clicks)
(0) Confirm that the segments display is like Fig.22-26.
Fig.25<X-FADER CURVE>
Do the check same as the <LOOP LENGTH> (1)-(5).
The segments display becomes Fig.28, then the check proceeds to the next.
*In this item, <LEVEL> is not checked.
Fig.26<CH FADER CURVE>
Fig.27<EQ SELECTOR>
8. A/D (volume) Check (CROSS FADER)
1.<CROSS FADER>(near and sidewise fader)
(0) Confirm that the segments display is Fig.28.
(1) Move the CROSS FADER between the left end and the right end
for several times and finally stop at the left end.
(2) Confirm that the [TAP] LED is lighting.
Fig.28<CROSS FADER>
* Note for A/D Check
<When A/D Check LED lights.>
During 9-11 A/D Check, some LED lights.
This is a guide to operation, you need not confirm the lighting.
<A/D Check Error>
During 9-11 Check, when a volume which is not checked now is moved,
[CUE SPRIT] LED lights and the check can not be proceed to the next.
9. Internal Check completed
Press the [TAP].
Fig.29
Automatically the segments display changes Fig29, Fig30.
After Fig.30 is displayed turn the power off.
Fig.30
KORG INC.
4／10
2007/4/23
QCI-5800
Page
ZERO4 (X-5800) Check before Shipping
Revised
No.
Date
