Korg 700s, Owner'S Manual

Page: 17 / 39

17
12.
VIBRATO switch
Used to turn the vibrato effect on or off.
13.
DELAY VIB. switch
Used to apply vibrato a short while later after keying. This switch is effective
when you want to make the instrument sing.
14.
PORTAMENTO switch
Used to turn on or off the portamento effect that smoothly changes
the tone when moving to the next key.
15.
ARP switch
This gives you the same effect as if you had played the keys repeat-
edly. When you play more than one key at a time, this functions as
an arpeggiator.
16.
ARPEGGIATOR
MODE: Specifies how steps advance when the arpeggiator plays.
BPM SYNC: If this is ON, the arpeggiator will synchronize to the
tempo of Legacy Cell’s TEMPO controller (when operating in Legacy
Cell stand-alone mode) or the tempo of the host application (when
operating as a plug-in).
KEY SYNC: If this setting is ON, the arpeggiator will be reset at each
note-on.
LATCH: Specifies whether the arpeggiator will continue playing even
after note-off occurs.
RANGE: Specifies the range in which the arpeggiator will play the
pattern.
SPEED: This determines the resolution of the arpeggio pattern when
“TEMPO SYNC” is ON.
If “TEMPO SYNC” is ON, one cycle of the arpeggio pattern will equal
the note value you select for “BASE NOTE” (at the synchronized
tempo) multiplied by the “TIMES” specified by the “SPEED/TIMES”
knob.
17. VIBRATO
SPEED slider: Used to adjust the vibrato speed. Natural vibrato is
obtained in the center.
DEPTH slider : Used to adjust the vibrato depth. Natural vibrato is
obtained in the center.
18. PORTAMENTO slider
You can extensively adjust the strength of portamento ranging from
natural portamento to sound effects.
19. PITCH slider
Used to perform master tuning of the main unit. A=440Hz is ob-
tained in the center.