Korenix JetWave 2450 Series, User Manual, Page: 48 / 59

Chapter 5 Management Page 38
Backup Settings
By clicking “ Save ” a dialog box will popup. Save it, then the configuration file like ap.cfg will be
saved to your local computer.
Retrieve Settings
By clicking “ Browse ” a file selection menu will appear, select the file you want to load, like ap.cfg;
Click “ Upload ” to load the file. After automatically rebooting, new settings are applied.
Restore Factory Default Settings
The JetWave 2450 provides two ways to restore the factory default settings:
Restore factory default settings via Web
From “ Configuration File ”, clicking “ Reset ” will eliminate all current settings and reboot your device,
then default settings are applied.
Figure 36 Restore Settings
Restore factory default settings via RS-232
If software in JetWave 2450 is unexpectedly crashed and no longer reset the unit via Web, you may
do hardware reset via the reset button.
Reboot
You can reboot your JetWave 2450 from “ Configuration File ” in “ Management ” as below:
Click “ Reboot ” and hit “ Yes ” upon the appeared prompt to start reboot process. This takes a few
minutes.