Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 27/1568
2.5.5
Quick Start up Uploading from Switch to Out-of-Band PC
Table 2-5. Quick Start up Uploading from Switch to Out-of-Band PC (XMODEM)
Command
Details
copy startup-config xmodem
<filename>
This starts the upload and displays the mode of uploading and
the type of upload it is and confirms the upload is taking place.
For example:
If the user is using HyperTerminal, the user must specify where
the file is going to be received by the pc.
2.5.6
Quick Start up Downloading from Out-of-Band PC to Switch
Table 2-6 Quick Start up Downloading from Out-of-Band PC to Switch
Command
Details
copy xmodem startup-config
<filename>
Sets the download datatype to be an image or config file.
The URL must be specified as: xmodem: filepath/ filename
For example:
If the user is using HyperTerminal, the user must specify which
file is to be sent to the switch. The Switch will restart
automatically once the code has been downloaded.
2.5.7
Quick Start up Downloading from TFTP Server
Before starting a TFTP server download, the operator must complete the Quick Start up for the
IPAddress.
Table 2-7 Quick Start up Downloading from TFTP Server
Command
Details
copy <url> startup-config <filename>
Sets the download datatype to be an image or config file.
The URL must be specified as: tftp://ipAddr/filepath/fileName.
The startup-config option downloads the config file using tftp
and image option downloads the code file.
