JetNet 7850G-2XG/6852G
Industrial 10G SFP+ Layer 3 Managed Ethernet Switch
Quick Installation Guide V1.0
The JetNet 7850G-2XG and JetNet 6852G are a 19-inch Gigabit Layer 3 Managed Switch,
equipped with 48 10/100/1000 Base-TX ports including 2 x 1/10GbE dual speed SFP+
(JetNet 7850G-2XG) or 4 x 1G SFP (JetNet 6852G) ports delivering maximum throughput
and flexibility for high-density and ultra-high-speed connection. In addition to the
100-240VAC power-based JetNet 7850G-2XG and JetNet 6852G model, Korenix provides
the JetNet 7850G-2XG and JetNet 6852G series, which support 48V power inputs and
feature a design with -10~55oC wide operating temperature for severe industrial applications.
Package Check List
The Rack Mount Managed Ethernet Switch
Console cable
Rack Mount kit
Power Cord (Depend on Country, JetNet 7850G-2XG-DC48 and JetNet 6852G-DC48
no Power Cord)
QIG
Interface Introduction
1. Dimension:
The JetNet 7850G-2XG and JetNet 6852G Industrial Gigabit Layer 3
Managed Switch dimension ( H x W x D) is 44mm x 440mm x 292.1mm.
2. Front-Panel Components:
The front panel of the Switch consists of 48 Gigabit interfaces ,
2 x 10G ports(JetNet 7850G-2XG) , 4 x 1G SFP ports (JetNet 6852G) , 1 built-in
1000/100/10 RJ-45 Ethernet service ports, an RJ-45 based RS-232 communication port, and
an USB port.
JetNet 7850G-2XG 48 10/100/1000BASE-T with 2 SFP+ 10G interfaces
3. LED Indicators
System LED
The Status LED indicator represents status
of the switch. The Power LED indicator
represents power ON or OFF.
4. Rear Panel Description
The rear panel of the Switch contains AC or DC power connector and 2 Fans.
Management Port LED
Overview
A Beijer Electronics Group Company
Installation
Mount the Switch to 19’’ rack
1. Attach the brackets to the device by using the
screws provided in the Rack Mount kit.
2. Mount the device in the 19’ rack by using four
rack-mounting screws provided by the rack
manufacturer.
3. When installing multiple switches, mount them
in the rack one below the other.
Note:
Check if the rack environment
temperature conforms to the
specified operating temperature
range. Do not place any equipment
on top of the switch and please
properly grounded.
The DC power range support -48V (-36 ~ -72V) DC input.
The AC power connector is a standard three-pronged connector that supports the power
cord. Plug the female connector of the provided power cord into this socket, and the male
side of the cord into a power outlet. The Switch automatically adjusts its power setting to
any supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz.
JetNet 6852G 48 10/100/1000BASE-T with 4 SFP 1G interface
Function
Port Link at 1000 Mbps
Port Link at 100 Mbps
Port Link at 10 Mbps
Network Link
Network Activity
No Network Link or port disable
Color
LED
Eth ACT
(Link/Activity)
Eth LINK
(Speed)
Orange
Green
Off
Green
Green Blink
Off
Port LED
LED
LED
Function
Port Link at 1000 Mbps
Port Link at 100 Mbps
Port Link at 10 Mbps
Network Link
Network Activity
No Network Link or port disable
Color
Link/Activity
Speed
Orange
Green
Off
Green
Green Blink
Off
LED
LED
Function
System OS is ready
All DC power is ready
Color
Status
Power
Orange
Green
10GbE SFP+ Ports for JetNet 7850G-2XG model
Function
Port Link
Port Disable
Network Link
Network Activity
No Network Link
ACT
LINK
Color
Green
OFF
Green
Green Blink
OFF
LED
1GbE SFP Ports for JetNet 6852G model
Port X_
ACT
Port X_
LINK
Function
Port Link
Port Disable
Network Link
Network Activity
No Network Link
Color
Green
OFF
Green
Green Blink
OFF
LED
Rear panel with DC power connector
Rear panel with AC power connector
Industrial 48G+2 x 10G SFP+ Ports Gigabit Layer 3 Managed
Ethernet Switch, 100-240 VAC
Industrial 48G+2 x 10G SFP+ Ports Gigabit Layer 3 Managed
Ethernet Switch, 48VDC
Industrial 48G+4G SFP Ports Gigabit Layer 3 Managed
Ethernet Switch, 100-240VAC
Industrial 48G+4G SFP Ports Gigabit Layer 3 Managed
Ethernet Switch, 48VDC
Model Name
Description
JetNet 7850G-2XG-DC48
JetNet 7850G-2XG
JetNet 6852G
JetNet 6852G-DC48
481.6(18.96)
292.1(11.5)
440(15.74)
464.6(18.29)
44(1.73)
