10
Hardware Feature | Korenix
3-3
Bottom View
The bottom side of the JetBox 5630Gf-w series is shown below.
3-4
Wiring the Power Inputs
JetBox 5630Gf-w series accepts 9~36V DC power input.
1.
Insert the positive and negative wires of your DC supply into the V+ and V- contacts of the
terminal block connector. The recommended working voltage is DC24V (DC9~36V).
2.
Tighten the terminal screws to prevent the DC wires from loosening.
Pin
Signal Name
1
VCC
2
GND
3-5
Grounding JetBox
There is one grounding screw on the bottom side, and please connect the frame grounding of
system to the grounding surface to ensure safety and prevent noise to interfere communication.
Power On/off Switch
Terminal Block
Reset Button
Console Port
Earth Grounding Screw
