Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 995/1246
9.3.24
Managing Spanning Tree
9.3.24.1
Configuring Switch Spanning Tree Configuration Page
Selection Criteria
Spanning Tree Admin Mode
- Specifies whether spanning tree operation is enabled on the switch.
Value is enabled or disabled
Spanning Tree Forward BPDU
- Specifies whether spanning tree for BPDU is enabled on the
switch. Value is enabled or disabled.
Force Protocol Version
- Specifies the Force Protocol Version parameter for the switch. The
options are IEEE 802.1d, IEEE 802.1w, and IEEE 802.1s The default value is IEEE 802.1w.
Edgeport BPDU Filter -
Specifies whether Edgeport BPDU Filter is enabled on the switch. Value is
enabled or disabled.
Edgeport BPDU Guard -
Specifies whether Edgeport BPDU Guard is enabled on the switch. Value
is enabled or disabled.
Uplink Fast -
Specifies whether Uplink Fast is enabled on the switch. Value is enabled or disabled.
Configurable Data
Configuration Name
- Identifier used to identify the configuration currently being used. It may be up
to 32 alphanumeric characters
Configuration Revision Level
- Identifier used to identify the configuration currently being used.
The values allowed are between 0 and 65535. The default value is 0.
Non-Configurable Data
Configuration digest key
- Identifier used to identify the configuration currently being used.
MST Table
- Table consisting of the MST instances (including the CST) and the corresponding
VLAN IDs associated with each of them.
