Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 941/1246
9.3.10
Managing IP Subnet-based VLAN
9.3.10.1
IP Subnet-based VLAN Configuration Page
IP Subnet to VLAN mapping is defined by configuring an entry in the IP Subnet to VLAN table. An entry
is specified via a source IP address, network mask, and the desired VLAN ID. The IP Subnet to VLAN
configurations are shared across all ports of the device.
Selection Criteria
IP Address
- Selects the IP Address bound to a VLAN ID. To add another IP Subnet-based VLAN,
select "Add" option.
Configurable Data
IP Address
- Valid IP Address bound to VLAN ID. This field is configurable only when a new IP
Subnet Based VLAN is being created. IP Address in dotted decimal notation.
Subnet Mask
- Valid Subnet Mask of the IP Address. This field is configurable only when a new IP
Subnet-based VLAN is being created. Subnet mask should be in dotted decimal notation.
VLAN ID
- VLAN ID can be any number in the range of (1 to 4093).
Priority
- Priority can be any number in the range of (0 to 7).
Command Buttons
Submit
- Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete
- Delete an entry of IP Subnet to VLAN mapping.
