Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 337/1246
6.8.3
Dot1x Configuration Commands
6.8.3.1
dynamic-vlan
This command enable dot1x dynamic vlan creation configuration.
Syntax
dot1x dynamic-vlan enable
no dot1x dynamic-vlan enable
Default Setting
None
Command Mode
Global Config
6.8.3.2
dot1x port-control
This command sets the authentication mode to be used on all ports. The control mode may be one of the
following.
force-unauthorized:
The authenticator PAE unconditionally sets the controlled port to unauthorized.
force-authorized:
The authenticator PAE unconditionally sets the controlled port to authorized.
auto:
The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server.
mac-based:
The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator, and the authentication server on a per
supplicant basis.
Syntax
dot1x port-control all {auto | force-authorized | force-unauthorized | mac-based}
no dot1x port-control all
all -
All interfaces.
no -
This command sets the authentication mode to be used on all ports to 'auto'.
Default Setting
auto
Command Mode
Global Config
