31
▪
Sleep(hour):
You can select the hours of operation before switching to standby
mode. When the device switches to low-power mode, the display shows the current
time (to remove the time display, set the
Auto Standby Time
to Off).
▪
Timer Setting:
You can set different viewing timers (the device turns on and displays
the selected channel) or edit existing ones.
▪
Power ON/OFF:
You can activate a scheduled Power ON and a scheduled Power
OFF.
2.5 Option
To access the menu, press the button
MENU
and then, using the arrow [
Vol+/Vol-
],
select
Option.
Using the arrow [
CH+/CH-
] you can select the sub-menu (
OSD
Language, EPG Language, Subtitle Language, TTX Language, First Audio
Language, Second Audio Language, Digital Audio
) and press
OK
to open the
selected item or using the [
Vol+/Vol-
] you can directly change the settings. Press
EXIT
to exit the menu.
▪
OSD/EPG/Subtitle/TTX Language:
Allows you to select the language used in the
OSD, in the Primary / Secondary Audio and in Teletext.
▪
First/Second Audio Language:
Allows you to select the audio stream for 1
st
/2
nd
Audio language.
▪
Digital Audio:
2.6 System
To access the menu, press the button
MENU
and then, using the arrow [
Vol+/Vol-
],
select
System.
Using the arrow [
CH+/CH-
] you can select the sub-menu (
Parental
Guidance, Lock Control, Factory Reset, System Information, Software
Upgrade, Network Setting, Power On Control
) and press
OK
to open the selected
item or using the [
Vol+/Vol-
] you can directly change the settings. Press
EXIT
to exit
the menu.
▪
Parental Guidance:
Once the password has been entered, you can select the age
rating limit (
Lock Control->Channel Lock= On
) to request the password in order
to watch a channel and protect your children from inappropriate content. You can also
type a new password by typing it 2 times. The default password is "0000".
▪
Lock Control:
If
Channel Lock=ON
the user must enter a password when a
channel is under a forbidden rating. If
Menu Lock=ON
the user must enter a
password before change some menu settings.
You can also type a new password by
typing it 2 times (
Change Password
). The default password is "000000".
▪
Factory Reset:
Allows a reset to the initial conditions.
▪
System Information:
Information about the firmware, hardware used by the device
is displayed.
Summary of Contents for DTR-3342
Page 1: ...1 INDICE Italiano ...
Page 36: ......
