15
IMPORTANT SAFETY INSTRUCTIONS
CHOOSING WHERE TO POSITION YOUR LASER PROJECTOR
For optimum results, when deciding where to position your projector,
remember that there should be no obstacles between the projector
and the surface on which it is to project. Projector coverage: approx.
300 m2 (if used at a distance of approx. 12 m). When using this unit
outdoors, be sure to connect it to a water-resistant power outlet.
When using electrical appliances the following safety measures should
always be observed.
WARNING:
the use of settings, commands or procedures other than
those described in these instructions may be dangerous
1.
Read all instructions.
2.
Remember that the laser projector will only turn on only once it is
dark due to the internal brightness sensor.
3.
This apparatus must not be used by persons (including children)
with reduced physical, sensory or mental abilities; by persons who lack
experience and knowledge of the apparatus, unless they are carefully
supervised or well-educated with regard to the use of the appliance by
a person responsible for their safety. Children must be supervised to
ensure that they do not play with the device.
4.
Do not operate this device if the power cord or plug is damaged.
5.
Do not use the laser projector if it has been damaged in any way.
6.
Disconnect the headlamp from the electrical outlet when not in ope-
ration to reduce the risk of electric shock.
7.
Do not point the laser at the eyes or face.
8.
Do not attempt to open the unit under any circumstances.
9.
Do not use near infants/cots and keep away from children.
