13
WITH ALTERNATING CURRENT. BEFORE OPERA-
TING, MAKE SURE THAT THE VOLTAGE CORRE-
SPONDS TO THE ONE INDICATED ON THE DATA
PLATE.
• ONLY CONNECT THE APPLIANCE TO THE POWER
OUTLETS WITH A MINIMUM CAPACITY OF 10 AM-
PERES.
• DO NOT PULL THE POWER CORD OR THE AP-
PLIANCE ITSELF TO REMOVE THE PLUG FROM THE
WALL SOCKET.
• FULLY UNWIND THE POWER CORD BEFORE OPE-
RATING THE APPLIANCE.
• USE AN ELECTRIC EXTENSION CORD ONLY IF IT IS
IN PERFECT CONDITION.
• NEVER LET THE POWER CORD RUN THROUGH
SHARP EDGES; AVOID CRUSHING IT.
• DO NOT LEAVE THE APPLIANCE EXPOSED TO
ATMOSPHERIC AGENTS (RAIN, FROST, SUN, ETC.).
• NEVER USE THE APPLIANCE:
- WITH WET OR MOIST HANDS;
- IF IT HAS FALLEN AND HAS OBVIOUS RUPTURES
OR MALFUNCTIONS;
- IF THE PLUG OR POWER CORD DEFECTIVE;
- IN HUMID OR GAS SATURATED ENVIRONMENTS.
• DO NOT COVER THE APPLIANCE WITH TOWELS,
CLOTHING, ETC.
• PLACE THE APPLIANCE ONLY ON HORIZONTAL
AND STABLE SURFACES,
AWAY FROM SHOWERS, BATHTUB, SINKS, ETC.
• IF THE APPLIANCE IS WET OF GETS IN CON-