14
INTENDED USE
THIS APPLIANCE IS A HEATER WHICH STORES AND RELEASES
HEAT. IT IS INTENDED FOR HOME USE ONLY AND CAN ONLY BE
USED FOR THIS PURPOSE. IT WILL BE SUFFICIENT TO INSERT THE
PLUG IN THE SOCKET FOR A FEW MINUTES TO HAVE A HOT BOTT-
LE AVAILABLE FOR SEVERAL HOURS.
PLEASE ALSO OBSERVE ALL THE INFORMATION CONTAINED IN
THESE OPERATING INSTRUCTIONS, ESPECIALLY THE SAFETY
WARNINGS. ANY OTHER USE IS CONSIDERED AS AN UNFORE-
SEEN USE AND MAY CAUSE DAMAGE TO THINGS OR EVEN TO
PEOPLE.
READ THE INSTRUCTIONS CAREFULLY BEFORE USE.
BEFORE USE
1. Remove the appliance from the transport packaging and check its
integrity.
2. Place on a flat, stable surface with the electrical current plug upwards.
3. Insert the plug into the clutch bag.
OPERATION
1. Insert the plug into the power socket.
2. A light on the plug will light up to indicate that the appliance is in
charge.
3. After about 15 minutes the light will turn off meaning that the ap-
pliance has reached the right temperature for use.
4. First disconnect the plug from the socket and after the cable from
the appliance.
5. The appliance has been filled with water and sealed in production
and does not need or will ever need to be topped up
DURING CHARGING, DO NOT PLACE THE APPLIANCE ON
CARPETS, MATS, BLANKETS, AND ANY UNEVEN SURFACE,
UNSTABLE (MATTRESSES) AND UPHOLSTERED (ARMCHAIRS
ETC). THE APPLIANCE MUST NEVER BE USED WITH THE CUR
RENT CABLE PLUGGED INTOTHE SOCKET.
