18
19
DESCRIPTION OF THE APPLIANCE
1. Boiler turning on/off button
2. Iron turning on/off button
3. Led boiler operating indicator
4. Safety cap
5. Iron operating light indicator
STARTING THE APPLIANCE
FILLING WITH WATER
•
Caution! Before filling the boiler with water, turn off and unplug the
machine.
•
Fill the steam ironing system only with distilled water. Lime could cause
overheating and the obstruction of steam holes with consequent damages
to the appliance.
•
The steam ironing system must rest on a flat surface.
•
Turn the cap (4) anticlockwise, unscrew it completely.
•
Empty the boiler of the possible remaining water. Pour water inside only
when the boiler is empty.
•
Put a funnel in the filling hole.
•
Pour an adequate water quantity (when the boiler is empty min. 0.2 l -
max 0.85 l) into the boiler.
•
ATTENTION: Don’t pour more than 850cc (0,85 l.) of water. Never exceed
this quantity
•
Remove the funnel.
•
Put the cap back in its place: turn it clockwise till it is completely screwed.
•
Caution! Make sure that the machine is closed properly.
CONNECTING THE STEAM IRONING SYSTEM - CAUTION!
•
Connect the machine only if the mains voltage corresponds to the rated
voltage reported on the rating label.
•
The water tank must be filled with a sufficient water quantity (when the
