14
OPERATING THE APPLIANCE
This fan is intended for ventilating living spaces. This appliance is intended for domestic use and
it can be used only for this purpose. Follow all the information contained in these instructions,
especially the safety precau-tions. Any other use is considered improper and can lead to property
damages or even personal injury.o
Operating instructions
1. Speed control: you can adjust the speed of the fan thanks to a button or a knob of the control
panel according to the following instructions: (1) Operating the knob: switch on the fan by
sliding the knob to one of the 3 speed settings (1-2-3). Swi-tch off the fan by setting the knob on
“O”. (2) Operating the buttons: switch on the fan simply pressing one of the 3 speed buttons
(1-2-3). Press the “O” button to switch off the fan.
2. Oscillating function: press the oscillating knob and block it in order to stop the fan.
3. Adjusting the inclination: switch off the fan before adjusting the inclination. You can direct the
airflow upwards or downwards by simply moving the fan’s safety grid.
4. Adjusting the height: loosen the height knob, set the desired height, finally tighten the knob.
ASSEMBLY INSTRUCTIONS
1. L –shaped screw
2. Counterweight
3. Cover
4. Base
5. Rod
6. Rod fixing flange
7. Adjustable rod
8. Stand fixing screw
9. Control panel
10. Plastic ring screw
11. Front grid/protection screen
12. Blades
13. Back griD
1. Secure the rod (5) to the base (4) and to the counterweight (2): insert the rod in the special slot
(hide the join between the base and the rod with the cover (3)). Secure using the L –shaped
screw with washer (1).
2. Set the adjustable rod (7) to desired height and block it by tightening the rod fixing flange (6).
3. Insert the back grid (12) on the motor unit, make sure the handle is on the upper side (see the
image on the next page) by positioning in such a way that the pins go in the dedicated holes.
