17
INSTALLATION & OPERATING INSTRUCTIONS
1. push rod
2. feed tube
3. rotating propeller
4. filter
5. outer cup
6. Switch
7. Body
8. Base
9. Product juice cup
10. Slag cup
2
3
4
5
6
7
8
9
10
ASSEMBLY INSTRUCTIONS
IMPORTANT:
Prior to Assembling the juicer please check this
point: At the base of the bowl there is a rubber stopper. When in
place the stopper ensures all of the juice only exits via the juice
outlet. Before Juicing always ensure that the rubber stopper is fir-
mly in place.
1. Assemble the bowl on the base.
• Make sure the bowl is all the way into the shaft of the base.
2. Insert the strainer into the spinning brush. Align the red dot on
the strainer with the red dot on the bowl
+spinning brush into the bowl. When the dots are correctly aligned
the strainer
+spinning brush will lock in place.
3. Insert the squeezing screw into the strainer and turn until it
drops into position.
4. Assemble the hopper onto the bowl.
• Align the small arrow on the hopper with the red dot on the bowl.
• Twist the hopper so that the plastic tab with the arrow on it points
to the closed sign on the base.
1
