23
CHARGING
Note: Charge the appliance fully before you use it for the first time.
Note: This appliance can only be used without cord.
To charge the appliance, insert the small plug into the socket in the
bottom of the appliance and put the adapter in the wall socket.
- The charge indicator flashes white (Fig. 2): the appliance is charging.
Charging takes up to 1.5 hours.
- The charge indicator lights up white continuously (fig. 3): the applian-
ce is fully charged and has a cordless operating time up to 40 minutes.
- The charge indicator does not light up when the appliance is switched
on: the appliance contains enough energy to be used.
- The battery indicator flashes orange (fig. 2): the battery is almost
empty and need to be charged. Charge the appliance when you have
finished using it.
Note: If the appliance is fully charged but still connected to the mains,
the battery indicator flashes a few times when you press the on/off but-
ton. This indicates that you should disconnect the appliance from the
mains before you can switch it on.
Quick charge
- When the battery is completely empty and you start charging it, the
battery indicator flashes white quickly.
- After approximately 15 minutes, the battery indicator starts flashing
white slowly. At this point, the battery contains enough energy for up
to 10 minutes of epilation.
USING THE APPLIANCE
Attaching and detaching heads
1. To attach a head, press it onto the handle (click; fig. 3)
Attaching and detaching accessories
1. To attach an accessory, simply snap it onto the head (click; fig. 3)
2. To detach an accesory, grab its front and back and pull it upwards
off the head (fig. 4). To detach a comb, pull ist back upwards with a
fingernail (fig. 5).
Switching the appliance on and off
1. To switch on the appliance, press the on/off button once (fig. 6)
2. If you want to select speed 1, press the on/off button again. Speed
light lights up (fig. 7)
