29
the holes in the base plate, inserting them into the holes before tighte-
ning the ball screw once more.
6. Repeat steps 2, 3, 4, and 5 to attach the rear part of the base plate
to the radiator.
NOTE: The rear wheels must be mounted between the last two hea-
ting elements.
INSTRUCTIONS FOR USE
1. Before operating the radiator, ensure that it is on a flat and stable
surface. An inclined surface may cause damage to the radiator.
2. Turn the switch to 0 (OFF) and the temperature dial to MIN. Plug the
power cord into a grounded outlet.
3. Turn the temperature dial clockwise to MAX and turn the power swi-
tch as follows: LOW (Power I), MED (Power II), HIGH (Power III), and
OFF to turn off.
4. Once the room has reached the desired temperature, slowly turn
the temperature dial counterclockwise until the power light turns off.
Leave the dial in this position. When the room temperature falls below
the set temperature, the radiator will turn on automatically and operate
until the set temperature is reached once more. In this way, the room
temperature will remain constant whilst the lowest possible amount of
electricity is consumed.
5 To adjust the set temperature, turn the temperature dial clockwise to
increase, or counter-clockwise to decrease.
6 This radiator is equipped with a system to protect against overhea-
ting that turns the device off when certain parts become excessively
hot.
7 To turn off the radiator completely, turn all controls to the OFF posi-
tion and unplug the power cord from the socket.
