VII. Specific Model Data
Mounting
Kooltronic Air Conditioners have been engineered to be installed easily. To avoid damaging your
Air Conditioner, please read the following information before installation.
•
Top-Mounted Air Conditioners for external top installation contain weld-nuts.
•
Refer to page 8 for the location of all mounting holes and cutouts.
•
Make sure the cutouts don't interfere with components inside your cabinet.
•
Proper alignment of all air inlets and outlets is essential for optimum performance of
the Air Conditioner.
•
Place supplied gasket on perimiter of enclosure cutouts. All externally-mounted Air
Conditioners must be fully gasketed to ensure proper sealing. This seal is necessary to
maintain the integrity of the closed loop system.
•
Use all existing mounting holes to insure stability and a tight seal.
•
High strength mounting screws are recommended.
•
The external drain hose must not be elevated above the exit port. Improper mounting will
impede the flow of condensate and may cause internal malfunctions.
When unmounting the unit from the cabinet, make certain
to keep the unit level, to avoid spilling of any water
that may be in the condensate pan.
7
3/
4
1
9/
16
1
3 TYP.
17
3/
8
15
7/
8
14
1/
4
3/
4
3
3/
4
9
15/
16
2
5/
16
2
13/
16
(6)
.312 DIA.
HOLES
31
12
1/
2
TYP.
3
4
1/
16
TYP.
3
5/
8
22
1/
2
20
1/
2
16
1/
2
TYP.
2
3
3/
4
16
1/
2
5
1/
2
(6)
.312 DIA.
HOLES
33
3/
4
11
7/
8
TYP.
5
WARM AIR RETURN
FROM ENCLOSURE
(Enclosure opening should be located as
high as possible within this area, and equal
or exceed size of cool air outlets.)
COOL AIR OUTLET
TO ENCLOSURE
➀
MOUNTING PLANS
Dimensions (inches) are for reference only and are subject to change.
CAUTION
HT 14/16
HT 7-12
