~ 13 ~
FEATURES:
- Default SET temperature 57º F/14º C (ideal for wine storage).
- Calibration option of the temperature sensor.
- Display of actual temperature by request.
- SET temperature range 52ºF-64ºF.
- Digital temperature sensor.
- Dual display Fº/Cº.
- Settings are stored in memory for power failures.
- Pre programed software will reach the quietest most efficient operation.
OPERATION:
- The display will show the detected temperature until the temperature will fall within 3º of the SET POINT.
- If the temperature is above the default 57º F + 1º or other preset value, after a
delay of 1 minute
the fan will
start, followed by the compressor within the next minute.
- The unit will cycle ON/OFF based on the temperature reading. Fan speeds are automatically set by the controller
to achieve optimum performance.
- Minimum ON and OFF cycle times are imposed by software, to prevent "short cycling".
SAFETY FEATURES:
ALARM:
- If the temperature exceeds 72º F the unit will shut down, a sound warning will start and the dispaly will blink
alternating with the temperature reading.
- This function is disabled in the first 4 hours “ Cool Down” period or after any reset for another 4 hours.
- The unit will restart and continue the cooling and cycling if the temperature falls below 72º F.
TO RESET:
- Unplug and re plug the unit.
57
º
56
º
70
º
57
º
57
º
57
º
57
º
58
º
57
º
56
º
57
º
14
º
57
º
57
º
57
º
F0
F0
F1
F0 -1
Actual temperature:
PRESS
SET temperature:
PRESS
PRESS and RELEASE
To increase:
PRESS once per degree
To decrease:
PRESS once per degree
The new value will be memorized and the controller will reset automatically.
PRESS and HOLD until buzzer sounds in 5 seconds
The new value will be memorized and the controller will reset automatically.
PRESS and HOLD while holding PRESS and RELEASE
Wait 5 seconds
USE or
for each degree of offset
DISPLAY EXAMPLE
BEFORE AFTER
TO DISPLAY:
TO MODIFY SET
TEMPERATURE
(range is 52-64
ºF)
:
TO CHAANGE FROM
ºF to ºC: or
ºC to ºF
TO CALIBRATE:
CONTROLLER
OPERATION
ACTION
NOTE:
A negative offset will result in a warmer cabinet and a positive offset will result in a cooler cabinet.
The new value will be memorized and the controller will reset automatically.
CONTROLS : PLUG IT IN
(wait one minute)
and ENJOY!
57
KEYS
AL
DISPLAY:
