The stackable system is available in 2 heights A (32”) and B (48”) allowing
for the following modularity:
Base / Crown molding and quarter round (optional) can be added to AA and
AB configurations for 8’ ceiling height.
Base / Crown trim addition to BB requires min. 99” ceiling height.
MULTIPLE MODULES
If installing multiple modules, screw adjoining racks together. Fasten
through adjoining bars with 7/8” screws at top, middle and bottom rows,
as shown
(Take the diamond slats out for more space).
To avoid cracking, pre-drill 1/16” holes for screws. Fasten through rear
rack sections as well as front. If stacking modules, fasten adjoining
horizontal bars in at least two places. For additional strength and sta-
bility, fasten through bottom horizontal bars into base or floor with 7/8”
screws or nails.
NOTE :
All the above configurations assure alignment of modules
Nominal 48” B modules are 47 3/4” to allow for stacking in a nominal
8’ ceiling room.
32"
48"
*
WIDTH"
96"
*
80"
48"
A
A
A
B
A
B
B
B
B
64"
AA
AB
BB
*
