OPERATING INSTRUCTIONS
1. Control panel
2. Air outlet
3. Side panel
4. Front panel
5.
Air inlet
6. Back panel
7. Water tank
8. Wheel leg
CONTROL PLATE DESCRIPTION
OPERATION INSTRUCTION
1. POWER KEY
Press to turn unit “ON” or “OFF”.
2. FAN SPEED
Press the key to select fan speed “HI” or “LOW”.
3. TIMER
a. Press the key to timer setting desired (1~24 hour).
b. Once the set time has come to an end, the unit will turn off automatically.
c. Pressing the “POWER” key before the set time has been reached will cause the set time to be cancelled
when the unit turns off.
Press the key to set the humidity desired (RH60%,65%,70%,75%,80%, CONTINUOUS,40%,45%,50%,55%).
4. When the room humidity is less than the set humidity within 5% then the compressor will turn off automatically , until
the room humidity is higher than the set humidity by 5% again.
5.
TANK FULL
If this indicator illuminates, it means tank is full of water, and unit will operate with the fan only (The compressor will
stop running automatically,) until the tank was empty
