Removal
1.
Ensure the unit is switched off and disconnected from the power supply. Remove the top air inlet cover on the rear of
the unit. The cover is removed by releasing the two catches on the top edge of the cover and then carefully pulling
the top of the cover back slightly until the entire cover can be lifted away from the rear of the unit.
2.
Remove the HEPA filter from the aperture in the rear of the unit that has been revealed by removing the air inlet
cover, by peeling back the top left or top right corner of the black surround. Avoid touching any of the cooling
coils/fins when removing the filter.
3.
Carefully replace the air inlet cover ensuring that the locating lugs are correctly aligned with their associated locating
holes in the case and the release catches are properly aligned with their locating holes. Do not use excessive force
when refitting the top air inlet cover.
4.
Reconnect the unit to the power supply and use in Cooling, Heating, Dehumidifying, Fan or Auto Mode.
Copyright © Cottage Stores LLP 2019. All rights reserved
‘Koolbreeze’ and ‘Climateasy’ are registered trademarks of Cottage Stores LLP.
All other product names, trademarks, registered trademarks and logos are the property of their respective owners.
Distribution of substantively changed versions of this document is prohibited without explicit permission of the
copyright holder.
Distribution of this document or derivative work in any standard (paper) form for commercial purposes is prohibited
unless approval is obtained from the copyright holder.
This document is provided ‘AS IS’ without any representations or warranties, express or implied.
Please send any corrections or suggested amendments to [email protected].
