INSTRUCTIONS
The Chocolate Fountain Double Tower is easy to use, just follow these
simple instructions.
Your Chocolate Fountain Double Tower requires little assembly. Wipe
out base bowl with a damp cloth and dry. Wash augers and tower parts
in warm soapy water, rinse in warm water, dry with non-abrasive towel.
ASSEMBLY
• After cleaning, return augers to base making sure they are securely in
place by aligning the groove on the bottom of the auger to the motor
base pin.
• Do not attempt to place augers or tower on base, or remove from
base, while the motor or heater is on.
• After placing the Augers, stand the two large Tower Tubes on a solid
surface.
• Fit the large Tier securely over both so the tops of the tubes protrude
through the holes in the Tier.
• Next, attach the two small Tower Tubes securely to the large Tower
Tubes. Place the small Tier over the small Tower Tubes. Place the
Tower Fountain Tops securely over the small Tower Tubes. Make sure
Tower is securely assembled.
• Place completed Tower securely on the posts in the base aligning pins
in the Base Bowl to the Rings on the bottom of the large Tower Tubes.
•4•
ASSEMBLED TOWER
TOWER PARTS:
A - Large Tower Tubes (2)
B - Large Tier (1)
C - Small Tower Tubes (2)
D - Small Tier (1)
E - Tower Fountain Tops (2)
