Note
: both sides of the front wheel
installation method is the same
5
Installation of training wheel
Turn the car upside down.
Remove the M4X12mm screw that has been fixed
to the car body.
Install training wheel
s
.
Then
attach
with M4X12mm screw.
Install drive motor on the rear axle
Load a wheel on the rear axle
Load a 10# washer on the rear axle
Tighten the nut with plastic wrench
Add plastic wheel cover
Load a 10# washer on the axle
Place front wheel
Load another 10# washer on axle
Tighten the nut with plastic wrench
Add plastic wheel cover